Blinker Genie - for Motorcycles (pair)

  |  
P/N: MBLINK_REV3

Custom LED

$24.99 $29.99

In Stock! Click Add to Cart to view available shipping methods and rates.

×
ELFR-1 Electronic LED Flasher Relay for Motorcycle LED Blinkers - OEM Connector SALE

ELFR-1 Electronic LED Flasher Relay with OEM Connector

$19.98 $24.99
Maintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers. Plug and play connectivity with OEM connector for 2-wire AND 3-wire OEM Flasher Relay Connectors (see...
» View full product details
×
ELFR-1-H Electronic LED Flasher Relay 4-Pin Honda by Custom LED SALE

ELFR-1-H Electronic LED Flasher Relay 4-Pin Honda

$22.98 $29.99
Maintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers. Plug and play connectivity with OEM connector (see compatibility list). Recommended accessory for Custom LED Integrated...
» View full product details
×
ELFR-1-QD Electronic LED Flasher Relay with Quick Disconnects SALE

ELFR-1-QD Electronic LED Flasher Relay with Quick Disconnects

$20.98 $24.99
Maintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers. Plug and play connectivity with OEM connector (see compatibility list and/or check OEM flasher relay connector...
» View full product details
×
ELFR-1-U Electronic LED Flasher Relay 7-Pin Suzuki SALE

ELFR-1-U Electronic LED Flasher Relay 7-Pin Suzuki

$22.98 $29.99
Maintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers. Plug and play connectivity with OEM fitment (see compatibility list). Recommended accessory for Custom LED Integrated...
» View full product details
×
Honda OEM Turn Signal Connectors, 3-Wire

Honda OEM Turn Signal Connectors, 3-Wire (pair)

$6.99
Typically used for front turn signal connectors on Honda motorcycles. Fits multiple years/models - confirm individually. Comes with 8" long 22AWG wire installed. Protective sheathing prevents chafing. Sold as pairs...
» View full product details
×
Yamaha OEM Turn Signal Connectors, 3-Wire

Yamaha OEM Turn Signal Connectors, 3-Wire (pair)

$6.99
Typically used for front and rear turn signal connectors on some Yamaha motorcycles. Fits multiple years/models - confirm individually. Comes with 8" long 22AWG wire installed. Protective sheathing prevents chafing....
» View full product details
Share:
  • Allows for Run AND Turn operation of Single-Intensity (2-Wire) LED Blinkers on Motorcycles.
  • Universal installation - check out our NEW Application Specific Blinker Genie's.
  • Formerly called Magic Blinker.
  • New high-speed solid state design is compatible with all flasher relay patterns.
  • Built-in Stage I Load Equalizer helps prevent the no-blink or 4-way blink condition.
  • Comes as a complete kit with electrical connectors and detailed instructions.
  • Recommended accessories: Electronic LED Flasher Relay & OEM Blinker Connectors.
  • High-Power capability of 12A/ 180 Watts (2A/ 25 Watts recommended).
  • Low on-state resistance means your indicators will be as bright as possible.
  • Works with LED or incandescent lamps.
  • Manufacturer direct purchase.
  • 1-Year Warranty & Satisfaction Guarantee.
  • Made in the USA.
  • Sold as a PAIR.
  • Ships same business day.

Overview

The Custom LED Blinker Genie is designed to allow single filament light bulbs, and single intensity LED lamps, to function as both running lights AND blinkers on Motorcycles! 

This Universal Blinker Genie is designed for use on Motorcycles.  For Automobile applications check out our Blinker Genie 2!  We also have new Application Specific Blinker Genie's which come pre-wired for some applications!

Most aftermarket LED blinkers support only a two wire connection, which means they can only be used as either a running light, or a blinker light.  The Blinker Genie solves this problem, and intelligently controls the lamp to function as BOTH a running light and a blinker!

Properly connect any two-wire incandescent or LED indicators to the Custom LED Blinker Genie, and your indicator bulbs/LEDs will now stay on constantly as running lights, and blink when you engage the blinkers!  (Note: the indicator will turn off for the duration of the blinker pulse - this is how the blinking is achieved.)

The Custom LED Blinker Genie is designed to be as small as possible while being as versatile and robust as possible.  The finished dimensions of the unit will measure approximately 0.7" x 1.25" X 0.25" and can support up to 12A of current (see specifications)!  This ensures our product will work for any application (blinking your headlights individually, or powering one single LED lamp for instance).  To further ease installation and ensure dependability, the Custom LED Blinker Genies are water resistant.

Each Blinker Genie controls up to 2A worth of lamps in the recommended configuration.  The Blinker Genie's are sold IN PAIRS.  One will be required for each side of the motorcycle, and for every 2A worth of operated indicator load (25W).

For most applications, they are used in the front to drive two wire LED indicators.  Technically, if you ran wires to the back, you could control the rear blinker lamps with the Blinker Genies as well.  However, it is recommend that you use one Blinker Genie for each "corner" of the vehicle.

The Blinker Genie comes with 7" wires, butt-connectors and detailed installation instructions!  Please read the important notes in the Installation Tab for other accessories that may be required to maintain proper function of the blinker system after installing the Blinker Genie.

Features

  • Made in the USA
  • New high-speed solid state design is compatible with all flasher relay blink patterns (like our ELFR-P)
  • Built-in Stage I Load Equalizer helps to prevent the no-blink or 4-way blink condition (some bikes)
  • Comes as a complete kit with electrical connectors and detailed instructions
  • Works with LED or incandescent indicators
  • Completely water proof
  • 1-Year Warranty & Satisfaction Guarantee

Specifications

  • Maximum Recommended Indicator Load: 2A (25W)
  • Maximum Switching Current: 12A
  • Internal Resistance: 0.18 OHMS
  • Maximum Switching Speed:  1Mhz
  • Switch type: Advanced Power Mosfet
  • ONLY functions with a Negative Common Ground System (most common)

    Video

    We have a large collection of all Custom LED product videos on the Custom LED YouTube Channel.

    The videos in this playlist below are a collection of user-submitted and original videos related to this product.

    Installation

    You will most likely experience the fast-blink rate if you install the Blinker Genie on your motorcycle - even if you are using the Blinker Genie along with the OEM turn signal lamps. It is important to note that the Blinker Genie effectively removes the operated lamp(s) from the turn signal circuit, as the Blinker Genie powers them through the running light circuit instead of the turn signal circuit.  This is detected as a bulb burned out by most motorcycles, and a fast-blink rate results.

    The Blinker Genie only imposes a 2W load on the blinker circuit itself.  Please consider replacing your flasher relay with one of our Electronic LED Flasher Relays (preferred) or use an appropriate Load Equalizer instead (second method).

    Installation of the Blinker Genie is represented in the illustration below.  Read the downloadable installation instructions below thoroughly for additional installation information. 

    Blinker Genie Installation Diagram

    Click to download installation instructions

    Click icon to download.
    Adobe Acrobat Reader is required to view this file.
    If you are having problems viewing the file, please download the free software here.

    AUTOMOBILE/CAR INSTALLATION NOTE:

    The Blinker Genie was designed specifically for use on motorcycles where the running light circuit is on anytime the vehicle is in operation.  We do not recommend installing this product on an automobile where the running light circuit can be on or off.  For automobiles, we have a purpose-built Blinker Genie 2!

    GENERAL NOTE:

    For motorcycles that do not have running lights in the front of their motorcycle (such as the new Kawasaki sportbikes), the red wire on the Blinker Genie must be connected to an ignition switched source for proper operation.

    HONDA MOTORCYCLE SPECIAL NOTE:

    In order to properly utilize the Blinker Genie on most Honda Motorcycles, the left and right running light wires (blue/white stripe and orange/white stripe) must be interconnected together and connected to both red input wires on the Blinker Genies. 

    The reason is because the running light circuit that powers the front signal lamps cuts off completely on the side that the turn signal is activated, and stays off until the turn signal is canceled.  This causes the Blinker Genie to not work properly as the Blinker Genie is designed to draw all power from the red input wire, and requires power at all times that the ignition is on.

    Recommended Accessories

    When installing the Blinker Genie on your motorcycle, it is highly recommended that you also replace your flasher relay to maintain the normal blink rate.

    Instagram Feed

    Tag us @Custom_LED_LLC in your Instagram Photos to see your photos here!

    Stay in Touch

    Call Us

    We'd love to here from you. Call us at 201-477-0031 and we'll be happy to answer any questions you have.

    Free Shipping!

    Get Free Shipping (USA only) on all orders over $199! Use Discount Code: $200ShipsFree

    Latest News

    • 2015-2023 Yamaha YZF-R1 Ultimate Stealth Plate Mounts!

        Custom LED is proud to announce the Ultimate Stealth Plate Mount for the 2015-2023 Yamaha YZF-R1.  This is a perfect compliment to our Blaster-X Tail Lights, or as a stand-alone fender eliminator kit.  This kit has provisions for optional... read more

    • 2016-2020 Kawasaki ZX-10R Blaster-X Integrated LED Tail Light Pre-Orders Open!

      Great News! We are now accepting orders for the 2016-2020 Kawasaki ZX-10R Blaster-X Integrated LED Tail Light! Please visit the product page for more information and to place your order .   read more

    • NEW! 2020 Yamaha MT-03 Blaster-X Tail Light

      Custom LED is pleased to announce our  Blaster-X tail light for the 2020 Yamaha MT-03!  This tail light is based on our highly acclaimed FZ-07 Blaster-X Tail Light, but with the proper turn signal connectors for the MT-03 read more